• Home
  • Microsoft Exam Dumps
  • Why Choose Lead2pass?
  • Sitemap

Lead2pass New Updated IT Exam Questions

Exam collection of Micfosoft, Cisco,IBM,CompTIA and other IT exam

Menu
  • Home
  • Microsoft Exam Dumps
  • Why Choose Lead2pass?
  • Sitemap
 › 300-320 Dumps › 300-320 Exam Questions › 300-320 New Questions › 300-320 PDF › 300-320 VCE › Cisco › [2017 New] Free 300-320 Exam Dumps With PDF And VCE Download (226-250)

[2017 New] Free 300-320 Exam Dumps With PDF And VCE Download (226-250)

admin August 3, 2017     Comment Closed    

2017 August Cisco Official New Released 300-320 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Lead2pass.com providing 100% 300-320 exam passing guarantee with real exam questions. We are providing here outstanding braindumps for your 300-320 exam. With the Help of our exam dumps you can get more than 95%.

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/300-320.html

QUESTION 226
Which two design concerns must be addressed when designing a multicast implementation? (Choose two.)

A.    only the low-order 23 bits of the MAC address are used to map IP addresses
B.    only the low-order 24 bits of the MAC address are used to map IP addresses
C.    only the high-order 23 bits of the MAC address are used to map IP addresses
D.    only the low-order 23 bits of the IP address are used to map MAC addresses
E.    the 0x01004f MAC address prefix is used for mapping IP addresses to MAC addresses
F.    the 0x01005e MAC address prefix is used for mapping IP addresses to MAC addresses

Answer: AF

QUESTION 227
Which two of these are characteristics of multicast routing? (Choose two.)

A.    multicast routing uses RPF.
B.    multicast routing is connectionless.
C.    In multicast routing, the source of a packet is known.
D.    When network topologies change, multicast distribution trees are not rebuilt, but use the original path
E.    Multicast routing is much like unicast routing, with the only difference being that it has a a group of receivers rather than just one destination

Answer: AC

QUESTION 228
Which of the following is most accurate with respect to designing high availability within the Enterprise Campus network?

A.    High availability at and between the Distribution and Access layers is as simple as redundant switches and redundant Layer 3 connections
B.    Non-deterministic traffic patterns require a highly available modular topology design
C.    Distribution layer high availability design includes redundant switches and Layer 3 equal-cost load sharing connections to the switched Access and routed Core layers, with a Layer 3 link between the Distribution switches to support summarization of routing information from the Distribution to the Core
D.    Default gateway redundancy allows for the failure of a redundant Distribution switch without affecting endpoint connectivity

Answer: D

QUESTION 229
Which of the following should the Enterprise Campus network designer consider with respect to Video traffic?

A.    While it is expected that the sum of all forms of video traffic will grow to over 90% by 2013, the
Enterprise will be spared this rapid adoption of video by consumers through a traditional top-down approach
B.    Avoid bandwidth starvation due to video traffic by preventing and controlling the wide adoption
of unsupported video applications
C.    Which traffic model is in use, the flow direction for the traffic streams between the application
components, and the traffic trends for each video application
D.    Streaming video applications are sensitive to delay while interactive video applications, using
TCP as the underlying transport, are fairly tolerant of delay and jitter

Answer: C

QUESTION 230
Which two design recommendations are most appropriate when OSPF is the data center core routing protocol? (Choose two.)

A.    Never use passive interfaces.
B.    Use NSSA areas from the core down.
C.    Use totally stub areas to stop type 3 LSAs.
D.    Use the lowest Ethernet interface IP address as the router ID.
E.    Manipulate the reference bandwidth.

Answer: BE

QUESTION 231
A client security policy requires separate management control planes for different divisions with the company, which technology can be used to achieve this requirement while minimizing physical devices ?

A.    Virtual routing and forwarding
B.    Virtual device contexts
C.    Virtual Switching System
D.    Virtual Local Area Networks
E.     Virtual port channels

Answer: B

QUESTION 232
Which three Layer 2 access designs have all of their uplinks in an active state? (Choose three.)

A.    Flex Links
B.    loop-free U
C.    looped square
D.    looped triangle
E.    loop-free inverted U

Answer: BCE

QUESTION 233
Which three statements about Network Attached Storage are correct? (Choose three.)

A.    Data is accessed using NFS or CIFS.
B.    Data is accessed at the block level.
C.    NAS is referred to as captive storage.
D.    Storage devices can be shared between servers.
E.    A NAS implementation is not as fast as a DAS implementation.

Answer: ADE

QUESTION 234
In a collapsed core design, which three benefits are provided by a second-generation Cisco MDS director? (Choose three.)

A.    a higher fan-out ratio
B.    fully redundant switches
C.    100 percent port efficiency
D.    all ISLs contained within a single chassis
E.    higher latency and throughput than a core-edge design switch

Answer: BCD

QUESTION 235
Which two statements about both FCIP and iSCSI are correct? (Choose two.)

A.    They support file-level storage for remote devices.
B.    They require high throughput with low latency and low jitter.
C.    Their purpose is to provide connectivity between host and storage.
D.    They support block-level storage for remote devices.
E.    Their purpose is to provide connectivity between separate wide-area SANs.

Answer: DE

QUESTION 236
Which three statements about zoning are correct? (Choose three.)

A.    Zoning increases security.
B.    DNS queries are used for software zoning.
C.    Software zoning is more secure than hardware zoning.
D.    When using zones and VSANs together, the zone is created first.
E.    Zoning requires that VSANs be established before it becomes operational.

Answer: ABE

QUESTION 237
What are two characteristics of Server Load Balancing router mode? (Choose two.)

A.    The design supports multiple server subnets.
B.    An end-user sees the IP address of the real server.
C.    SLB routes between the outside and inside subnets.
D.    The source or destination MAC address is rewritten, but the IP addresses left alone.
E.    SLB acts as a “bump in the wire” between servers and upstream firewall or Layer 3 devices.

Answer: AC

QUESTION 238
What are two characteristics of Cisco Global Site Selector? (Choose two.)

A.    It helps verify end-to-end path availability.
B.    It provides traffic rerouting in case of disaster.
C.    HSRP, GLBP, and VRRP can be clients of GSS.
D.    BGP must be the routing protocol between the distributed data centers.
E.    DNS responsiveness is improved by providing centralized domain management.

Answer: BE

QUESTION 239
Drag and Drop Question

 

Answer:

 

QUESTION 240
Drag and Drop Question

 

Answer:

 

QUESTION 241
Refer to the exhibit. Which recommended practice is applicable?

 

A.    If no core layer is deployed, the design will be easier to scale.
B.    A dedicated campus core layer should be deployed for connecting three or more buildings.
C.    If no core layer is deployed, the distribution switches should not be fully meshed.
D.    A dedicated campus core layer is not needed for connecting fewer than five buildings.

Answer: B

QUESTION 242
When a router has to make a rate transition from LAN to WAN, what type of congestion needs should be considered in the network design?

A.    RX-queue deferred
B.    TX-queue deferred
C.    RX-queue saturation
D.    TX-queue saturation
E.    RX-queue starvation
F.    TX-queue starvation

Answer: F
Explanation:
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Campus/HA_campus_DG/hacampusdg.html

QUESTION 243
To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus?

A.    to a core switch running Cisco NSF and SSO from redundant distribution switches connected with
a Layer 2 link
B.    to a core switch running Cisco NSF and SSO from redundant distribution switches connected with
a Layer 3 link
C.    to two core switches from redundant distribution switches connected with a Layer 2 link
D.    to two core switches from redundant distribution switches connected with a Layer 3 link
E.    to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO

Answer: D

QUESTION 244
Which of these statements is correct regarding Stateful Switchover and Cisco Nonstop Forwarding?

A.    Utilizing Cisco NSF in Layer 2 environments can reduce outages to one to three seconds.
B.    Utilizing SSO in Layer 3 environments can reduce outages to one to three seconds.
C.    Distribution switches are single points of failure causing outages for the end devices.
D.    Utilizing Cisco NSF and SSO in a Layer 2 environment can reduce outages to less than one second.
E.    NSF and SSO with redundant supervisors have the most impact on outages at the access layer.

Answer: E

QUESTION 245
When is a first-hop redundancy protocol needed in the distribution layer?

A.    when the design implements Layer 2 between the access and distribution blocks
B.    when multiple vendor devices need to be supported
C.    when preempt tuning of the default gateway is needed
D.    when a robust method of backing up the default gateway is needed
E.    when the design implements Layer 2 between the access switch and the distribution blocks

Answer: A

QUESTION 246
Which of these is a recommended practice with trunks?

A.    use ISL encapsulation
B.    use 802.1q encapsulation
C.    set ISL to desirable and auto with encapsulation negotiate to support ILS protocol negotiation
D.    use VTP server mode to support dynamic propagation of VLAN information across the network

Answer: B

QUESTION 247
Which of the following is a recommended practice of a data center core?

A.    Server-to-server traffic always remains in the core layer.
B.    The core infrastructure should be in Layer 3.
C.    Core layer should run BGP along with an IGP because iBGP has a lower administrative distance than any IGP.
D.    The Cisco Express Forwarding hashing algorithm is the default, based on the IP address and Layer 4 port.

Answer: B

QUESTION 248
Which statement about data center access layer design modes is correct?

A.    The access layer is the first oversubscription point in a data center design.
B.    The data center access layer provides the physical-level connections to the server resources and only operates at Layer 3.
C.    When using a Layer 2 looped design, VLANs are not extended into the aggregation layer.
D.    When using a Layer 3 design, stateful services requiring Layer 2 connectivity are provisioned from the aggregation layer.

Answer: A

QUESTION 249
Which two design recommendations are most appropriate when EIGRP is the data center core routing protocol? (Choose two.)

A.    Summarize data center subnets.
B.    Use passive interfaces to ensure appropriate adjacencies.
C.    Tune the EIGRP timers to enable EIGRP to achieve quicker convergence.
D.    Adjust the default bandwidth value to ensure proper bandwidth on all links.
E.    Advertise a default summary route into the data center core from the aggregation layer.

Answer: AB
Explanation:
“Here are some recommendations on EIGRP design for the data center core layer:
· Advertise a default summary route into the data center access layer with the ip summary- address eigrp interface command on the aggregation layer. · If other default routes exist in the network, such as from the Internet edge, you might need to filter them using distribute lists.
· Summarize the data center access layer subnets with the ip summary-address eigrp interface command from the aggregation layer.
· Use the passive-interface default command, and advertise only on the links that need to participate in the routing process using the no passive-interface interface command.”

QUESTION 250
Which two practices will avoid Cisco Express Forwarding polarization?(Choose two.)

 

A.    The core layer should use default Layer 3 hash information.
B.    The core layer should use default Layer 4 hash information.
C.    The distribution layer should use default Layer 3 hash information.
D.    The distribution layer should use default Layer 4 hash information.
E.    The core layer should use Layer 3 and Layer 4 information as input to the Cisco Expressing Forwarding hashing algorithm.
F.    The distribution layer should use Layer 3 and Layer 4 information as input into the Cisco Expressing Forwarding hashing algorithm.

Answer: AF

Lead2pass.com is best place to prepare your 300-320 exam with 100% reliable study guide. We are providing free sample questions here so you can check our study guide quality.

300-320 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDRmZpUHB2VDNvdTg

2017 Cisco 300-320 exam dumps (All 398 Q&As) from Lead2pass:

https://www.lead2pass.com/300-320.html [100% Exam Pass Guaranteed]

300-320 Dumps 300-320 Exam Questions 300-320 New Questions 300-320 PDF 300-320 VCE Cisco
300-320 braindumps300-320 exam dumps300-320 exam question300-320 pdf dumps300-320 practice test300-320 study guide300-320 vce dumpsLead2pass 300-320

 Previous Post

[2017 New] Free 300-320 Exam Dumps With PDF And VCE Download (201-225)

― August 3, 2017

Next Post 

[2017 New] Free Download 352-001 Exam Dumps VCE From Lead2pass (61-80)

― August 3, 2017

Author: admin

Related Articles

admin ― May 23, 2018 | Comment Closed

[May 2018] Free Version Lead2pass Cisco 300-320 PDF Dumps With Exam Questions Download 558q

Lead2pass 100% Valid 300-320 Exam Questions PDF Free Download: https://www.lead2pass.com/300-320.html QUESTION 31What network technology provides Layer 2 high availability between

admin ― April 9, 2018 | Comment Closed

[April 2018] Free Share Of Lead2pass 300-320 VCE And PDF Dumps 558q

admin ― February 24, 2018 | Comment Closed

[February 2018] 2018 Lead2pass New Updated 300-320 Exam Questions 537q

admin ― January 12, 2018 | Comment Closed

[January 2018] Ensure Pass 300-320 Exam By Training Lead2pass New PDF Dumps 537q

admin ― November 3, 2017 | Comment Closed

[Lead2pass New] Lead2pass Exam Collection 300-320 Dumps And 300-320 New Questions (351-375)

admin ― November 2, 2017 | Comment Closed

[Lead2pass New] Lead2pass Exam Collection 300-320 Dumps And 300-320 New Questions (326-350)

admin ― November 2, 2017 | Comment Closed

[Lead2pass New] Lead2pass Exam Collection 300-320 Dumps And 300-320 New Questions (301-325)

admin ― November 2, 2017 | Comment Closed

[Lead2pass New] Lead2pass Exam Collection 300-320 Dumps And 300-320 New Questions (276-300)

Categories

Premium VCE Test Engine

VCE Exam Simulator for Mobile

Take exams on your mobile device the same way you do on your desktop. iPhone, iPad and Android devices are supported.

Hottest Microsoft Exam Dumps

HOTMicrosoft 70-243 Dumps ➤ PDF & VCE
HOTMicrosoft 70-246 Dumps ➤ PDF & VCE
HOTMicrosoft 70-247 Dumps ➤ PDF & VCE
HOTMicrosoft 70-331 Dumps ➤ PDF & VCE
HOTMicrosoft 70-332 Dumps ➤ PDF & VCE
HOTMicrosoft 70-333 Dumps ➤ PDF & VCE
HOTMicrosoft 70-341 Dumps ➤ PDF & VCE
HOTMicrosoft 70-342 Dumps ➤ PDF & VCE
HOTMicrosoft 70-346 Dumps ➤ PDF & VCE
HOTMicrosoft 70-347 Dumps ➤ PDF & VCE
HOTMicrosoft 70-410 Dumps ➤ PDF & VCE
HOTMicrosoft 70-411 Dumps ➤ PDF & VCE
HOTMicrosoft 70-412 Dumps ➤ PDF & VCE
HOTMicrosoft 70-413 Dumps ➤ PDF & VCE
HOTMicrosoft 70-414 Dumps ➤ PDF & VCE
HOTMicrosoft 70-417 Dumps ➤ PDF & VCE
HOTMicrosoft 70-457 Dumps ➤ PDF & VCE
HOTMicrosoft 70-458 Dumps ➤ PDF & VCE
HOTMicrosoft 70-461 Dumps ➤ PDF & VCE
HOTMicrosoft 70-462 Dumps ➤ PDF & VCE
HOTMicrosoft 70-463 Dumps ➤ PDF & VCE
HOTMicrosoft 70-464 Dumps ➤ PDF & VCE
HOTMicrosoft 70-465 Dumps ➤ PDF & VCE
HOTMicrosoft 70-466 Dumps ➤ PDF & VCE
HOTMicrosoft 70-467 Dumps ➤ PDF & VCE
HOTMicrosoft 70-469 Dumps ➤ PDF & VCE
HOTMicrosoft 70-480 Dumps ➤ PDF & VCE
HOTMicrosoft 70-481 Dumps ➤ PDF & VCE
HOTMicrosoft 70-482 Dumps ➤ PDF & VCE
HOTMicrosoft 70-483 Dumps ➤ PDF & VCE
HOTMicrosoft 70-486 Dumps ➤ PDF & VCE
HOTMicrosoft 70-487 Dumps ➤ PDF & VCE
HOTMicrosoft 70-488 Dumps ➤ PDF & VCE
HOTMicrosoft 70-489 Dumps ➤ PDF & VCE
HOTMicrosoft 70-511 Dumps ➤ PDF & VCE
HOTMicrosoft 70-513 Dumps ➤ PDF & VCE
HOTMicrosoft 70-515 Dumps ➤ PDF & VCE
HOTMicrosoft 70-532 Dumps ➤ PDF & VCE
HOTMicrosoft 70-533 Dumps ➤ PDF & VCE
HOTMicrosoft 70-534 Dumps ➤ PDF & VCE
HOTMicrosoft 70-640 Dumps ➤ PDF & VCE
HOTMicrosoft 70-642 Dumps ➤ PDF & VCE
HOTMicrosoft 70-646 Dumps ➤ PDF & VCE
HOTMicrosoft 70-687 Dumps ➤ PDF & VCE
HOTMicrosoft 70-688 Dumps ➤ PDF & VCE
HOTMicrosoft 70-689 Dumps ➤ PDF & VCE
HOTMicrosoft 70-692 Dumps ➤ PDF & VCE
HOTMicrosoft 70-695 Dumps ➤ PDF & VCE
HOTMicrosoft 70-696 Dumps ➤ PDF & VCE
HOTMicrosoft 70-697 Dumps ➤ PDF & VCE
HOTMicrosoft 74-335 Dumps ➤ PDF & VCE
HOTMicrosoft 74-338 Dumps ➤ PDF & VCE
HOTMicrosoft 74-343 Dumps ➤ PDF & VCE
HOTMicrosoft 74-344 Dumps ➤ PDF & VCE
HOTMicrosoft 74-409 Dumps ➤ PDF & VCE
HOTMicrosoft 98-361 Dumps ➤ PDF & VCE
HOTMicrosoft 98-367 Dumps ➤ PDF & VCE
HOTMB2-700 Dumps ➤ PDF & VCE
HOTMB2-701 Dumps ➤ PDF & VCE
HOTMB2-702 Dumps ➤ PDF & VCE
HOTMB2-703 Dumps ➤ PDF & VCE
GetAll List Of Microsoft Dumps NOW

Hottest Cisco Exam Dumps

HOTCisco 200-120 Dumps ➤ PDF & VCE
HOTCisco 100-101 Dumps ➤ PDF & VCE
HOTCisco 200-101 Dumps ➤ PDF & VCE
HOTCisco 200-310 Dumps ➤ PDF & VCE
HOTCisco 200-355 Dumps ➤ PDF & VCE
HOTCisco 200-401 Dumps ➤ PDF & VCE
HOTCisco 210-260 Dumps ➤ PDF & VCE
HOTCisco 210-060 Dumps ➤ PDF & VCE
HOTCisco 210-065 Dumps ➤ PDF & VCE
HOTCisco 300-101 Dumps ➤ PDF & VCE
HOTCisco 300-115 Dumps ➤ PDF & VCE
HOTCisco 300-135 Dumps ➤ PDF & VCE
HOTCisco 300-206 Dumps ➤ PDF & VCE
HOTCisco 300-207 Dumps ➤ PDF & VCE
HOTCisco 300-208 Dumps ➤ PDF & VCE
HOTCisco 300-209 Dumps ➤ PDF & VCE
HOTCisco 300-070 Dumps ➤ PDF & VCE
HOTCisco 300-075 Dumps ➤ PDF & VCE
HOTCisco 300-080 Dumps ➤ PDF & VCE
HOTCisco 300-085 Dumps ➤ PDF & VCE
HOTCisco 400-101 Dumps ➤ PDF & VCE
HOTCisco 400-201 Dumps ➤ PDF & VCE
HOTCisco 400-051 Dumps ➤ PDF & VCE
HOTCisco 350-018 Dumps ➤ PDF & VCE
HOTCisco 642-035 Dumps ➤ PDF & VCE

Hottest CompTIA Exam Dumps

HOTSY0-401 Dumps ➤ PDF & VCE
HOTN10-006 Dumps ➤ PDF & VCE
HOT220-901 Dumps ➤ PDF & VCE
HOT220-902 Dumps ➤ PDF & VCE
HOTSG0-001 Dumps ➤ PDF & VCE
HOTCAS-002 Dumps ➤ PDF & VCE
HOTSK0-004 Dumps ➤ PDF & VCE

Other Hottest Exam Dumps

HOTVMware VCP550 Dumps ➤ PDF & VCE
HOTVMware VCP550D Dumps ➤ PDF & VCE
HOTVMware 1V0-601 Dumps ➤ PDF & VCE
HOTVMware 2V0-620 Dumps ➤ PDF & VCE
HOTVCP5-DCV Dumps ➤ PDF & VCE
HOTISC CISSP Dumps ➤ PDF & VCE
HOTPMI PMP Dumps ➤ PDF & VCE
HOTOracle 1Z0-051 Dumps ➤ PDF & VCE
HOTOracle 1Z0-052 Dumps ➤ PDF & VCE
HOTOracle 1Z0-060 Dumps ➤ PDF & VCE
HOTOracle 1Z0-061 Dumps ➤ PDF & VCE
HOTCitrix 1Y0-201 Dumps ➤ PDF & VCE
HOTCitrix 1Y0-301 Dumps ➤ PDF & VCE
HOTCitrix 1Y0-401 Dumps ➤ PDF & VCE
HOT312-50v9 Dumps ➤ PDF & VCE
HOTRHCSA EX200 Dumps ➤ PDF & VCE
HOTRHCE EX300 Dumps ➤ PDF & VCE

Archives

Tags

100-105 exam dumps 200-125 braindumps 200-125 exam dumps 200-125 exam question 200-125 pdf dumps 200-125 practice test 200-125 study guide 200-125 vce dumps 200-355 braindumps 200-355 exam dumps 200-355 exam question 200-355 pdf dumps 200-355 practice test 200-355 study guide 200-355 vce dumps 220-901 braindumps 220-901 exam dumps 220-901 exam question 220-901 pdf dumps 220-901 practice test 220-901 study guide 220-901 vce dumps 300-101 braindumps 300-101 exam dumps 300-101 exam question 300-101 pdf dumps 300-101 practice test 300-101 study guide 300-101 vce dumps 400-101 braindumps 400-101 exam dumps 400-101 exam question 400-101 pdf dumps 400-101 practice test 400-101 study guide 400-101 vce dumps 400-251 braindumps 400-251 exam dumps 400-251 exam question 400-251 pdf dumps 400-251 practice test 400-251 study guide 400-251 vce dumps Lead2pass 220-901 Lead2pass 400-101