• Home
  • Microsoft Exam Dumps
  • Why Choose Lead2pass?
  • Sitemap

Lead2pass New Updated IT Exam Questions

Exam collection of Micfosoft, Cisco,IBM,CompTIA and other IT exam

Menu
  • Home
  • Microsoft Exam Dumps
  • Why Choose Lead2pass?
  • Sitemap
 › 352-001 Dumps › 352-001 Exam Questions › 352-001 New Questions › 352-001 PDF › 352-001 VCE › Cisco › [Lead2pass New] 2017 New Released Cisco 352-001 Exam Dumps Free Download In Lead2pass (341-360)

[Lead2pass New] 2017 New Released Cisco 352-001 Exam Dumps Free Download In Lead2pass (341-360)

admin October 19, 2017     Comment Closed    

2017 October Cisco Official New Released 352-001 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

Lead2pass is now offering Lead2pass 352-001 dumps PDF and Test Engine with 100% passing guarantee. Buy Lead2pass 352-001 PDF and pass your exam easily. If you want real exam simulation then buy test engine and install on your pc for preparation.

Following questions and answers are all new published by Cisco Official Exam Center: https://www.lead2pass.com/352-001.html

QUESTION 341
Which three statements are correct for route filtering? (Choose three.)

A.    The OSPF router LSA can be filtered with route maps so they are not installed on the OSPF database.
B.    Route filtering can create suboptimal routing, thus increasing latency in the network.
C.    Inbound route filtering affects outbound traffic flow.
D.    By default, EIGRP filters topology information at every hop in the network.
E.    IS-IS filters reachability information from the Level 1 to Level 2 domain.
F.    By default, EIGRP filters the reachability information at every hop in the network.

Answer: BCD

QUESTION 342
What are three design criteria to consider when you choose how many classes to implement in a DiffServ policy? (Choose three.)

A.    service provider support capabilities, which include SLA, PHB, and marking criteria
B.    the ability to group applications and their requirements into classes
C.    baseline expectations and projected growth of RSVP sessions
D.    the ability to leverage single-rate and dual-rate token bucket policers for different classes
E.    the total queue depth on the corresponding devices in the network
F.    different capabilities in the network to apply PHBs and queue structures, and the ability to map multiple service classes to PHB

Answer: ABF

QUESTION 343
Which three tasks are common network management practices? (Choose three.)

A.    Ensure that all network devices have their clocks synchronized.
B.    Collect SNMP poll information for future regression analysis.
C.    Capture both ingress and egress flow-based packets, while avoiding duplication of flows.
D.    Look at average counters instead of instantaneous counters for inconsistent and bursty KPIs, such as CPU utilization and interface utilization.
E.    Validate data plane health, and application and services availability, with synthetic traffic.

Answer: ADE

QUESTION 344
In a rented office, workers are not assigned to specific cubes. The facility just began to use IEEE 802.1X authentication for the tenants. When workers have previously logged in to a PC, it works correctly, but when they move to another PC that has never been used before, they are unable to log in. Which redesign action will overcome this issue with minimal operational burden?

A.    Use machine authentication.
B.    Establish a “Bring Your Own Device” portal.
C.    Disable and re-enable network authentication when a new worker logs in to a new machine.
D.    Enable MAC Authentication Bypass.

Answer: A

QUESTION 345
When designing IP addressing for route summarization, which consideration is true?

A.    Summarization can be applied regardless of the network topology if the IP addressing scheme is structured.
B.    IP address space assignments should be based on the divisions of the company.
C.    Suboptimal routing is commonly caused by the information that is hidden in the summary route.
D.    Summary metrics are constant, regardless of the instabilities of the summary components.

Answer: C

QUESTION 346
In a network design, there are three distribution layers and one data center. What are the two main reasons for using a core layer in this design? (Choose two.)

A.    The use of a core layer provides Layer 3 capabilities to the campus.
B.    The core layer reduces the number of ports that are needed in the distribution layers.
C.    The core layer is needed when there are two or more distribution layers that are to be connected.
D.    The core layer would fulfill core network functions such as DPI and security policies.
E.    The core layer is capable of faster forwarding than any other layer or module in the network.

Answer: BC

QUESTION 347
What are three advantages of using ISATAP? (Choose three.)

A.    It is easier to set up than other tunneling mechanisms, such as 6RD and 6to4.
B.    It is supported on many platforms, such as Linux, Windows, and Cisco IOS Software.
C.    It works with both private and public addressing spaces.
D.    It is a point-to-multipoint tunneling mechanism.
E.    It does not require any changes on the underlying IPv4 network to operate.

Answer: BCE

QUESTION 348
What are two reasons to choose L2TPv3 over other technologies for a VPN solution? (Choose two.)

A.    The VPN solution does not contain MPLS on the network core.
B.    The VPN solution should support Frame Relay to Ethernet pseudowire connections.
C.    The VPN solution requires multipoint Ethernet LAN service.
D.    The VPN solution should be industry-standard.

Answer: AD

QUESTION 349
Company Y is a mobile backhaul provider that uses microwave rings in their network.
Which low-cost, simple technology do you recommend to Company Y to ensure the fastest convergence times in a ring topology?

A.    sub-second IGP hello and dead timers
B.    MPLS Traffic Engineering
C.    Remote Loop-Free Alternate
D.    IP Event Dampening
E.    hub and spoke with ECMP

Answer: C

QUESTION 350
On a large-scale DMVPN network design, what are two DMVPN characteristics? (Choose two.)

A.    DMVPN can interoperate with other vendors’ equipment.
B.    DMVPN supports multicast replication at the hub.
C.    DMVPN supports non-IP protocols.
D.    DMVPN supports dynamic partial- or full-mesh tunnels.

Answer: BD

QUESTION 351
What are two design characteristics of GETVPN? (Choose two.)

A.    It uses GDOI to distribute keys.
B.    It supports private addresses over public Internet.
C.    It requires multicast replication at the hub.
D.    It uses tunnel-less technology.
E.    It supports dynamic partial- or full-mesh tunnels.

Answer: AD

QUESTION 352
A financial services company runs HSRP at the edge of its network to allow for redundancy for the default gateway for its servers. The CTO of the company is concerned that the failover time for HSRP is too slow and a different mechanism should be used. The network engineer disagrees and believes that HSRP can provide the required fast down detection and failover for the edge of the network. Which option is the fastest down detection and failover solution for this HSRP environment?

A.    Limit the Layer 2 broadcast domain.
B.    Decrease the HSRP timers.
C.    Implement BFD.
D.    Migrate from IEEE 802.1D to 802.1w.
E.    Implement HSRP preemption.

Answer: C

QUESTION 353
The Database team will deploy a new clustering technology that uses IPv4, multicast-based data replication, where the servers listen and transmit at the same time on multiple groups. Multicast is not being run on the current network and there are no plans to enable it. New Layer 2 switches will be purchased to connect new servers in order to keep multicast traffic off the existing network. Which two features should the new switches support to provide good multicast performance? (Choose two.)

A.    IGMP snooping
B.    PIM snooping
C.    MLD snooping
D.    IGMP querier
E.    Bidirectional PIM

Answer: AD

QUESTION 354
In a routed access hierarchical campus design, the access-to-distribution Layer 2 uplink trunks are replaced with Layer 3 point-to-point routed links. Why is it recommended that VLANs are confined on a single access switch rather than span across multiple access switches?

A.    to allow for better convergence time
B.    to prevent the occurrence of Layer 2 loops
C.    to allow for fault isolation
D.    to prevent routing black holes

Answer: D

QUESTION 355
Which two mechanisms can anycast RPs use to share multicast state information with other RPs? (Choose two.)

A.    MSDP
B.    PIM anycast RP sets
C.    IGMPv3
D.    MLD
E.    static mroutes

Answer: AB

QUESTION 356
Which technique can be used to deploy IPv6 services in an IPv4-only routed backbone network?

A.    NAT64 at the peering locations
B.    6PE in the backbone network
C.    6RD on CE routers and 6RD border relays at the peering locations
D.    dual-stack lite and NAT44 at the peering locations

Answer: C

QUESTION 357
The network architect wants to reduce the OSPF database in the network by using summarization techniques. In which two places in the network can summarization be applied to maximum effect? (Choose two.)

A.    on the OSPF links of all ABR routers
B.    on the OSPF links of all ASBR routers
C.    on the OSPF links of all backbone routers
D.    on the routing process of all ABR routers
E.    on the routing process of all ASBR routers
F.    on the routing process of all backbone routers

Answer: DE

QUESTION 358
You are auditing the network design of a PIM BiDir multicast network. Which option is the most appropriate multicast group source discovery design consideration for this design?

A.    A phantom RP advertises the multicast group sources.
B.    Source discovery is not applicable to PIM BiDir.
C.    Subscribers discover the multicast group sources via DNS.
D.    Subscribers are statically configured with specific sources.
E.    MSDP is used to discover multicast group sources.

Answer: B

QUESTION 359
To improve the stability of the network and protect it from intrusions, you must design control plane security. Which two features should you enable as part of this design? (Choose two.)

A.    SNMP security
B.    uRPF
C.    IPsec
D.    IP receive ACL
E.    control plane policing
F.    role-based CLI access

Answer: DE

QUESTION 360
You are a network designer who must fine tune the convergence of an IS-IS network. The failure detection mechanism has been addressed with reliable loss-of-signal at the interface level.
Which three other tools or techniques should be employed to achieve your requirements? (Choose three.)

A.    Use prefix prioritization techniques.
B.    Use BFD on point-to-point links.
C.    Speed up LSP generation.
D.    Disable LDP-IGP synchronization.
E.    Speed up the initial link state computation.
F.    Eliminate the time that the overload bit is advertised to neighbors.

Answer: ACE

Now we are one step ahead in providing updated real exam dumps for 352-001. We provide 100% 352-001 exam passing guarantee as we will provide you same questions of 352-001 exam with their answers. Our Cisco 352-001 new questions are verified by experts.

352-001 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDaUphM0lMOWRjUU0

2017 Cisco 352-001 exam dumps (All 510 Q&As) from Lead2pass:

https://www.lead2pass.com/352-001.html [100% Exam Pass Guaranteed]

352-001 Dumps 352-001 Exam Questions 352-001 New Questions 352-001 PDF 352-001 VCE Cisco
352-001 braindumps352-001 exam dumps352-001 exam question352-001 pdf dumps352-001 practice test352-001 study guide352-001 vce dumpsLead2pass 352-001

 Previous Post

[Lead2pass New] 2017 New Released Cisco 352-001 Exam Dumps Free Download In Lead2pass (321-340)

― October 19, 2017

Next Post 

[Lead2pass New] 2017 New Released Cisco 352-001 Exam Dumps Free Download In Lead2pass (381-400)

― October 19, 2017

Author: admin

Related Articles

admin ― May 28, 2018 | Comment Closed

[May 2018] Pass 352-001 Exam By Exercising Lead2pass Latest 352-001 VCE And PDF Dumps 510q

Pass 352-001 Exam By Training Lead2pass New VCE And PDF Dumps: https://www.lead2pass.com/352-001.html QUESTION 31Refer to the exhibit. Your junior design

admin ― April 11, 2018 | Comment Closed

[April 2018] Updated 352-001 New Questions From Lead2pass Free Downloading 510q

admin ― February 26, 2018 | Comment Closed

[February 2018] Official 352-001 Exam Preparation Download From Lead2pass 510q

admin ― January 16, 2018 | Comment Closed

[January 2018] Official 352-001 Exam Preparation Download From Lead2pass 510q

admin ― December 19, 2017 | Comment Closed

[Q411-Q420] Lead2pass Provides Latest Exam 352-001 Dumps VCE For Free Downloading

admin ― October 19, 2017 | Comment Closed

[Lead2pass New] 2017 New Released Cisco 352-001 Exam Dumps Free Download In Lead2pass (381-400)

admin ― October 19, 2017 | Comment Closed

[Lead2pass New] 2017 New Released Cisco 352-001 Exam Dumps Free Download In Lead2pass (321-340)

admin ― October 19, 2017 | Comment Closed

[Lead2pass New] 2017 New Released Cisco 352-001 Exam Dumps Free Download In Lead2pass (301-320)

Categories

Premium VCE Test Engine

VCE Exam Simulator for Mobile

Take exams on your mobile device the same way you do on your desktop. iPhone, iPad and Android devices are supported.

Hottest Microsoft Exam Dumps

HOTMicrosoft 70-243 Dumps ➤ PDF & VCE
HOTMicrosoft 70-246 Dumps ➤ PDF & VCE
HOTMicrosoft 70-247 Dumps ➤ PDF & VCE
HOTMicrosoft 70-331 Dumps ➤ PDF & VCE
HOTMicrosoft 70-332 Dumps ➤ PDF & VCE
HOTMicrosoft 70-333 Dumps ➤ PDF & VCE
HOTMicrosoft 70-341 Dumps ➤ PDF & VCE
HOTMicrosoft 70-342 Dumps ➤ PDF & VCE
HOTMicrosoft 70-346 Dumps ➤ PDF & VCE
HOTMicrosoft 70-347 Dumps ➤ PDF & VCE
HOTMicrosoft 70-410 Dumps ➤ PDF & VCE
HOTMicrosoft 70-411 Dumps ➤ PDF & VCE
HOTMicrosoft 70-412 Dumps ➤ PDF & VCE
HOTMicrosoft 70-413 Dumps ➤ PDF & VCE
HOTMicrosoft 70-414 Dumps ➤ PDF & VCE
HOTMicrosoft 70-417 Dumps ➤ PDF & VCE
HOTMicrosoft 70-457 Dumps ➤ PDF & VCE
HOTMicrosoft 70-458 Dumps ➤ PDF & VCE
HOTMicrosoft 70-461 Dumps ➤ PDF & VCE
HOTMicrosoft 70-462 Dumps ➤ PDF & VCE
HOTMicrosoft 70-463 Dumps ➤ PDF & VCE
HOTMicrosoft 70-464 Dumps ➤ PDF & VCE
HOTMicrosoft 70-465 Dumps ➤ PDF & VCE
HOTMicrosoft 70-466 Dumps ➤ PDF & VCE
HOTMicrosoft 70-467 Dumps ➤ PDF & VCE
HOTMicrosoft 70-469 Dumps ➤ PDF & VCE
HOTMicrosoft 70-480 Dumps ➤ PDF & VCE
HOTMicrosoft 70-481 Dumps ➤ PDF & VCE
HOTMicrosoft 70-482 Dumps ➤ PDF & VCE
HOTMicrosoft 70-483 Dumps ➤ PDF & VCE
HOTMicrosoft 70-486 Dumps ➤ PDF & VCE
HOTMicrosoft 70-487 Dumps ➤ PDF & VCE
HOTMicrosoft 70-488 Dumps ➤ PDF & VCE
HOTMicrosoft 70-489 Dumps ➤ PDF & VCE
HOTMicrosoft 70-511 Dumps ➤ PDF & VCE
HOTMicrosoft 70-513 Dumps ➤ PDF & VCE
HOTMicrosoft 70-515 Dumps ➤ PDF & VCE
HOTMicrosoft 70-532 Dumps ➤ PDF & VCE
HOTMicrosoft 70-533 Dumps ➤ PDF & VCE
HOTMicrosoft 70-534 Dumps ➤ PDF & VCE
HOTMicrosoft 70-640 Dumps ➤ PDF & VCE
HOTMicrosoft 70-642 Dumps ➤ PDF & VCE
HOTMicrosoft 70-646 Dumps ➤ PDF & VCE
HOTMicrosoft 70-687 Dumps ➤ PDF & VCE
HOTMicrosoft 70-688 Dumps ➤ PDF & VCE
HOTMicrosoft 70-689 Dumps ➤ PDF & VCE
HOTMicrosoft 70-692 Dumps ➤ PDF & VCE
HOTMicrosoft 70-695 Dumps ➤ PDF & VCE
HOTMicrosoft 70-696 Dumps ➤ PDF & VCE
HOTMicrosoft 70-697 Dumps ➤ PDF & VCE
HOTMicrosoft 74-335 Dumps ➤ PDF & VCE
HOTMicrosoft 74-338 Dumps ➤ PDF & VCE
HOTMicrosoft 74-343 Dumps ➤ PDF & VCE
HOTMicrosoft 74-344 Dumps ➤ PDF & VCE
HOTMicrosoft 74-409 Dumps ➤ PDF & VCE
HOTMicrosoft 98-361 Dumps ➤ PDF & VCE
HOTMicrosoft 98-367 Dumps ➤ PDF & VCE
HOTMB2-700 Dumps ➤ PDF & VCE
HOTMB2-701 Dumps ➤ PDF & VCE
HOTMB2-702 Dumps ➤ PDF & VCE
HOTMB2-703 Dumps ➤ PDF & VCE
GetAll List Of Microsoft Dumps NOW

Hottest Cisco Exam Dumps

HOTCisco 200-120 Dumps ➤ PDF & VCE
HOTCisco 100-101 Dumps ➤ PDF & VCE
HOTCisco 200-101 Dumps ➤ PDF & VCE
HOTCisco 200-310 Dumps ➤ PDF & VCE
HOTCisco 200-355 Dumps ➤ PDF & VCE
HOTCisco 200-401 Dumps ➤ PDF & VCE
HOTCisco 210-260 Dumps ➤ PDF & VCE
HOTCisco 210-060 Dumps ➤ PDF & VCE
HOTCisco 210-065 Dumps ➤ PDF & VCE
HOTCisco 300-101 Dumps ➤ PDF & VCE
HOTCisco 300-115 Dumps ➤ PDF & VCE
HOTCisco 300-135 Dumps ➤ PDF & VCE
HOTCisco 300-206 Dumps ➤ PDF & VCE
HOTCisco 300-207 Dumps ➤ PDF & VCE
HOTCisco 300-208 Dumps ➤ PDF & VCE
HOTCisco 300-209 Dumps ➤ PDF & VCE
HOTCisco 300-070 Dumps ➤ PDF & VCE
HOTCisco 300-075 Dumps ➤ PDF & VCE
HOTCisco 300-080 Dumps ➤ PDF & VCE
HOTCisco 300-085 Dumps ➤ PDF & VCE
HOTCisco 400-101 Dumps ➤ PDF & VCE
HOTCisco 400-201 Dumps ➤ PDF & VCE
HOTCisco 400-051 Dumps ➤ PDF & VCE
HOTCisco 350-018 Dumps ➤ PDF & VCE
HOTCisco 642-035 Dumps ➤ PDF & VCE

Hottest CompTIA Exam Dumps

HOTSY0-401 Dumps ➤ PDF & VCE
HOTN10-006 Dumps ➤ PDF & VCE
HOT220-901 Dumps ➤ PDF & VCE
HOT220-902 Dumps ➤ PDF & VCE
HOTSG0-001 Dumps ➤ PDF & VCE
HOTCAS-002 Dumps ➤ PDF & VCE
HOTSK0-004 Dumps ➤ PDF & VCE

Other Hottest Exam Dumps

HOTVMware VCP550 Dumps ➤ PDF & VCE
HOTVMware VCP550D Dumps ➤ PDF & VCE
HOTVMware 1V0-601 Dumps ➤ PDF & VCE
HOTVMware 2V0-620 Dumps ➤ PDF & VCE
HOTVCP5-DCV Dumps ➤ PDF & VCE
HOTISC CISSP Dumps ➤ PDF & VCE
HOTPMI PMP Dumps ➤ PDF & VCE
HOTOracle 1Z0-051 Dumps ➤ PDF & VCE
HOTOracle 1Z0-052 Dumps ➤ PDF & VCE
HOTOracle 1Z0-060 Dumps ➤ PDF & VCE
HOTOracle 1Z0-061 Dumps ➤ PDF & VCE
HOTCitrix 1Y0-201 Dumps ➤ PDF & VCE
HOTCitrix 1Y0-301 Dumps ➤ PDF & VCE
HOTCitrix 1Y0-401 Dumps ➤ PDF & VCE
HOT312-50v9 Dumps ➤ PDF & VCE
HOTRHCSA EX200 Dumps ➤ PDF & VCE
HOTRHCE EX300 Dumps ➤ PDF & VCE

Archives

Tags

100-105 exam dumps 200-125 braindumps 200-125 exam dumps 200-125 exam question 200-125 pdf dumps 200-125 practice test 200-125 study guide 200-125 vce dumps 200-355 braindumps 200-355 exam dumps 200-355 exam question 200-355 pdf dumps 200-355 practice test 200-355 study guide 200-355 vce dumps 220-901 braindumps 220-901 exam dumps 220-901 exam question 220-901 pdf dumps 220-901 practice test 220-901 study guide 220-901 vce dumps 300-101 braindumps 300-101 exam dumps 300-101 exam question 300-101 pdf dumps 300-101 practice test 300-101 study guide 300-101 vce dumps 400-101 braindumps 400-101 exam dumps 400-101 exam question 400-101 pdf dumps 400-101 practice test 400-101 study guide 400-101 vce dumps 400-251 braindumps 400-251 exam dumps 400-251 exam question 400-251 pdf dumps 400-251 practice test 400-251 study guide 400-251 vce dumps Lead2pass 220-901 Lead2pass 400-101